The operation process of the computer scimitar machine

The emergence of the computer scimitar machine has made the knife mold professional leap forward. The computer scimitar machine is convenient, fast and efficient. It has a strong zigzag editing function, and realizes multiple operations of the scimitar, bridge position and olecranon on the same machine. On the machine, the workload of the operators is greatly reduced. It can be directly loaded into the cut template. Computer operation is more refined than manual scimitars, achieving the accuracy and consistency of scimitars. The emergence of the computer scimitar machine has accelerated the development of packaging, food, cartons, stickers, printing and other occupations.

The computer scimitar machine is controlled and operated by a computer, which is simple and easy to learn. Here is a brief introduction to some of the operating procedures when using the computer scimitar machine:

1. When turning on the machine, check whether there are any objects around the machine that prevent operation, plug in the power supply, etc.;

2. Make a knife line diagram of the die-cutting board on the computer, if you have done it, you can directly connect to the USB and copy it in;

3. It is very convenient to transfer the graph to the machete machine control program, and the equipment with various parameters can be directly connected to the computer interface;

4. Select the start and end points of the scimitar position, select the number of scimitars required for this position, set the compensation distance for the start and finish positions, and recognize whether to choose the olecranon or flat cutting method;

5. After doing the above work, you can start scimitar work;

6. In the process of production operation, do not leave the job post easily to prevent accidents.